|
When the tyre gets inflated to
the target pressure, the air pump beeps, and the display on the air
pump starts blinking. Cast a glance on the display to make sure it is
not showing “err” for error, which may occur if you set the air nozzle
incorrectly; if this is the case, reset the nozzle on the tyre valve as
described above.
Squeeze the stopper of the air hose
nozzle, remove it from the tyre valve, and screw back the valve cap.
Repeat to all tyres: it is unsafe
to inflate just some of them.
Coil the air hose, and hang it on
the hook at the air pump.
|
